QSC Logo
QSC - Hear the power of technology.
 
 
 
HomeProductsRMX 2RU Models › Specifications
  RMX Series
 
  Specifications

 
 
SPECIFICATIONS RMX 850 RMX 1450 RMX 1850HD RMX 2450
STEREO MODE (Both Channels Driven)
8 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD

185 W
200 W

260 W
280 W

350 W
360 W

450 W
500 W
4 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD

280 W
300 W

400 W
450 W

550 W
600 W

650 W
750 W
2 ohms
EIA 1 kHz, 1% THD

430 W

700 W

900 W

1200 W
BRIDGE MONO MODE
8 ohms
FTC 20 Hz - 20 kHz, 0.1% THD
EIA 1 kHz, 0.1% THD

530 W
600 W

800 W
900 W

1100 W
1200 W

1300 W
1500 W
4 ohms
EIA 1 kHz, 1% THD

830 W

1400 W

1800 W

2400 W
Signal to Noise, 20 Hz-20 kHz 100 dB 100 dB 100 dB 100 dB
Distortion (SMPTE-IM) Less than 0.01% Less than 0.01% Less than 0.02% Less than 0.02%
Input Sensitivity @ 8 ohms 1.15V (+3.4 dBu) 1.15V (+3.4 dBu) 1.16V (+3.5 dBu) 1.23V (+4.0 dBu)
Voltage Gain 31.6x (30 dB) 40x (32 dB) 46x (33 dB) 50x (34 dB)
Output Circuitry AB AB Class H Class H
Power Requirements
1/8 power pink noise at 4 ohms *

5A

6A

6A

7A
ALL MODELS
Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1.0 kHz and below: full rated power

Less than 0.03% THD, 4 and 8 ohms
Less than 0.03% THD, 4 and 8 ohms
Frequency Response 20 Hz-20 kHz, ±1 dB
-3 dB points: 5 Hz - 50 kHz
Damping Factor, 1 kHz and below Greater than 300 at 8 ohms
Input Impedance 10k ohms unbalanced, 20k ohms balanced
Input Clipping 10 Vrms (+22 dB)
Cooling Continuously variable-speed fan, rear-to-front air flow
Connectors, each channel Input: Active balanced; barrier strip, XLR and 1/4" (6.3mm)
TRS tip and XLR (pin 2 positive)
Output: touch-proof binding posts and Neutrik® Speakon®
Controls Front: AC switch, Ch. 1 and Ch. 2 gain knobs
Rear: 10-position DIP switch
Indicators Power-On: Green LED
Signal: Yellow LED (1 per channel)
Clip: Red LED (1 per channel)
Amplifier Protection Stable into reactive or mismatched loads
Load Protection On/off muting, AC coupling (850, 1450), triac crowbar (1850HD, 2450, on each channel)
Power Requirements 100, 120, 230 VAC, 50-60 Hz
Dimensions 19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 RU),
15.9" (40 cm) deep (rack mounting to rear support ears)
Weight 35 lbs (15.9 kg) net 40 lbs (18.2 kg) net 44.5 lbs (20.2 kg) net 44.5 lbs (20.2 kg) net
 
   
     
 
© 2008 QSC Audio. All Rights Reserved.