 |
|
 |
|
 |
|
|
|
|
|
| |
K Series |
|
|
|
|
|
| |
Specifications
|
|
| |
| K8 |
| Configuration |
Trapezoidal 2-way |
Transducers
Low Frequency
High Frequency |
8" cone transducer
1.75" diaphragm compression driver |
| Frequency Response (-6 dB) Frequency Range (-10 dB) |
66 Hz - 18 kHz
61 Hz - 20 kHz |
| Nominal coverage (-6 dB) |
105° conical |
| Maximum SPL (1 meter) |
127 dB peak |
Amplifier |
| Power output |
1000 W Class D
|
| Input impedance |
XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k |
| Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors |
Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 85 - 265 VAC, 50 - 60 Hz |
AC Power Consumption
(1/8 Power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
Impact resistant ABS |
| Finish |
Black paint |
| Grille |
Black powder coated 18 gauge steel |
| Suspension/Attachment Points |
9 M10 rigging locations |
| Connectors |
Balanced female XLR line level input
Balanced male XLR full range line level out |
| Dimensions |
17.7" x 11" x 10.6"
450 mm x 280 mm x 269 mm |
| Net weight |
27 lb / 12.2 kg |
| Available Accessories |
K8 TOTE, K8 YOKE, K SERIES M10 KIT |
|
| K10 |
| Configuration |
Multipurpose 2-way |
Transducers
Low Frequency
High Frequency |
10" cone transducer
1.75" diaphragm compression driver |
| Frequency Response (-6 dB) Frequency Range (-10 dB) |
60 Hz - 18 kHz
56 Hz - 20 kHz |
| Nominal coverage (-6 dB) |
90° conical |
| Maximum SPL (1 meter) |
129 dB peak |
Amplifier |
| Power output |
1000 W Class D
|
| Input impedance |
XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k |
| Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors |
Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 85 - 265 VAC, 50 - 60 Hz |
AC Power Consumption
(1/8 Power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
Impact resistant ABS |
| Finish |
Black paint |
| Grille |
Black powder coated 18 gauge steel |
| Suspension/Attachment Points |
9 M10 rigging locations |
| Connectors |
Balanced female XLR line level input
Balanced male XLR full range line level out |
| Dimensions |
20.4" x 12.6" x 11.8"
519 mm x 320 mm x 300 mm |
| Net weight |
32 lb / 14.5 kg |
| Available Accessories |
K10 TOTE, K10 YOKE, K SERIES M10 KIT |
|
| K12 |
| Configuration |
Multipurpose 2-way |
Transducers
Low Frequency
High Frequency |
12" cone transducer
1.75" diaphragm compression driver |
| Frequency Response (-6 dB) Frequency Range (-10 dB) |
52 Hz - 18 kHz
48 Hz - 20 kHz |
| Nominal coverage (-6 dB) |
75° conical |
| Maximum SPL (1 meter) |
131 dB peak |
Amplifier |
| Power output |
1000 W Class D
|
| Input impedance |
XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k |
| Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors |
Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 85 - 265 VAC, 50 - 60 Hz |
AC Power Consumption
(1/8 Power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
Impact resistant ABS |
| Finish |
Black paint |
| Grille |
Black powder coated 18 gauge steel |
| Suspension/Attachment Points |
9 M10 rigging locations |
| Connectors |
Balanced female XLR line level input
Balanced male XLR full range line level out |
| Dimensions |
23.7" x 14" x 14"
603 mm x 356 mm x 356 mm |
| Net weight |
41 lb / 18.6 kg |
| Available Accessories |
K12 TOTE, K12 YOKE, K SERIES M10 KIT |
|
| KSub |
| Configuration |
4th Order Bandpass |
Transducers
Low Frequency
|
2 x 12" cone transducer
|
| Frequency Response (-6 dB) Frequency Range (-10 dB) |
48 Hz - 134 Hz
44 Hz - 148 Hz |
| Maximum SPL (1 meter) |
130 dB peak |
Amplifier |
| Power output |
1000 W Class D
|
| Input impedance |
XLR / ¼": 40k balanced / 20k unbalanced |
| Controls |
Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal, Standby, Limit |
| Connectors |
Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 85 - 265 VAC, 50 - 60 Hz |
AC Power Consumption
(1/8 Power) |
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A |
| Enclosure |
Painted birch plywood |
| Finish |
Black textured paint |
| Grille |
Black powder coated 18 gauge steel |
| Suspension/Attachment Points |
9 M10 rigging locations |
| Connectors |
Balanced female XLR line level input
Balanced male XLR full range line level out |
| Dimensions |
26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm |
| Net weight |
74 lb / 33.6 kg |
| Available Accessories |
KSub Cover |
|
|
|
| |
 |
|
| |
|
|
|
|
 |
|
 |
|
|
MORE INFORMATION
K8
K10
K12
KSub
|
|
